Unraveling Peaktech 4060 Mv: From Full Specifications To Potential Issues

PeakTech 4060 MV Information

The PeakTech 4060 MV is a direct digital synthesis (DDS) function generator and pulse generator that offers a wide range of features and applications. It is a versatile tool that can be used for a variety of tasks in both analog and digital electronics.

Introduction

The PeakTech 4060 MV has a frequency range of 10 µHz to 20 MHz, with a resolution of 10 µHz. It can generate a variety of waveforms, including sine, square, triangle, sawtooth, and pulse. It also supports a number of modulation techniques, such as AM, FM, PM, PWM, and FSK.

The PeakTech 4060 MV has a number of other features that make it a valuable tool for electronics work. These include:

  • A built-in 10 W power amplifier
  • A USB interface for remote control and data logging
  • A trigger input for synchronization with other devices
  • A variety of safety features

Specifications

The following table summarizes the specifications of the PeakTech 4060 MV:

FeatureSpecification
Frequency range10 µHz to 20 MHz
Resolution10 µHz
WaveformsSine, square, triangle, sawtooth, pulse
ModulationAM, FM, PM, PWM, FSK
Power amplifier10 W
USB interfaceYes
Trigger inputYes
Safety featuresEN 61010-1; CAT II

Features

The PeakTech 4060 MV has a number of features that make it a versatile and powerful tool for electronics work. These include:

  • Direct digital synthesis (DDS): The DDS technology used in the PeakTech 4060 MV allows it to generate highly accurate and stable waveforms.
  • Wide frequency range: The frequency range of 10 µHz to 20 MHz makes the PeakTech 4060 MV suitable for a wide variety of applications.
  • High resolution: The resolution of 10 µHz allows the PeakTech 4060 MV to generate accurate and precise waveforms.
  • Variety of waveforms: The PeakTech 4060 MV can generate a variety of waveforms, including sine, square, triangle, sawtooth, and pulse.
  • Modulation: The PeakTech 4060 MV supports a number of modulation techniques, such as AM, FM, PM, PWM, and FSK.
  • Power amplifier: The built-in 10 W power amplifier allows the PeakTech 4060 MV to generate high-power signals.
  • USB interface: The USB interface allows the PeakTech 4060 MV to be controlled and data logged remotely.
  • Trigger input: The trigger input allows the PeakTech 4060 MV to be synchronized with other devices.
  • Safety features: The PeakTech 4060 MV meets the safety standards EN 61010-1 and CAT II.

What's in the box?

The PeakTech 4060 MV comes with the following items:

  • Function generator
  • Power cord
  • USB cable
  • BNC cable
  • Software CD
  • Instruction manual

ImageImage of PeakTech 4060 MV function generator

Conclusion

The PeakTech 4060 MV is a versatile and powerful function generator that offers a wide range of features and applications. It is a valuable tool for electronics work in both analog and digital domains.

PeakTech 4060 MV Compare with Similar Item

a table comparing the PeakTech 4060 MV with two similar products:

FeaturePeakTech 4060 MVRigol DG1022ZSiglent SDG1022X-E
Frequency range10 µHz - 20 MHz10 Hz - 20 MHz10 Hz - 20 MHz
Output waveforms161616
Frequency resolution10 µHz10 µHz10 µHz
Harmonic distortion-40 dBc-40 dBc-38 dBc
Total distortion< 1 %< 1 %< 1 %
Square waveform rise/fall time< 50 ns< 50 ns< 50 ns
Duty cycle1 - 99 %1 - 99 %1 - 99 %
Amplitude range0 - 20 Vpp0 - 20 Vpp0 - 20 Vpp
Amplitude offset± 10 V± 10 V± 10 V
Amplitude resolution5 mVpp5 mVpp5 mVpp
ModulationFM, AM, PM, PWM, FSKFM, AM, PM, PWM, FSKFM, AM, PM, PWM, FSK
Modulation frequency40 mHz - 20 kHz (FSK: 40 mHz - 100 kHz)40 mHz - 20 kHz (FSK: 40 mHz - 100 kHz)40 mHz - 20 kHz (FSK: 40 mHz - 100 kHz)
Operation voltage100 - 240 V AC100 - 240 V AC100 - 240 V AC
Dimensions (WxHxD)255 x 100 x 310 mm270 x 130 x 400 mm265 x 120 x 390 mm
Weight2 kg3 kg2.7 kg
Price$200$250$220

As you can see, the PeakTech 4060 MV is a very capable function generator with a wide range of features. It is a good choice for a variety of applications, including education, servicing, manufacturing, and engineering.

The Rigol DG1022Z and Siglent SDG1022X-E are two other good options to consider. They offer similar features to the PeakTech 4060 MV, but they are slightly more expensive.

Ultimately, the best choice for you will depend on your specific needs and budget.

PeakTech 4060 MV Pros/Cons and My Thought

The PeakTech 4060 MV is a DDS function generator that can be used for a variety of applications, including education, servicing, manufacturing, and engineering. It offers a wide range of features, including:

  • Direct digital synthesis (DDS) for high accuracy
  • 10 µHz frequency resolution over the entire frequency band
  • FM, AM, PM, PWM, and FSK modulation
  • 10 W power amplifier
  • USB interface for remote control

Here are some of the pros and cons of the PeakTech 4060 MV:

Pros:

  • High accuracy
  • Wide range of features
  • USB interface for remote control
  • Affordable price

Cons:

  • No built-in arbitrary waveform generator
  • No output connector for external load
  • No built-in speaker

Here are some user reviews of the PeakTech 4060 MV:

Positive reviews:

  • "This is a great function generator for the price. It's accurate, easy to use, and has a wide range of features."
  • "I'm using this for my electronics classes, and it's been a great tool. The students are able to learn about different types of signals and how to generate them."
  • "I'm a technician, and I use this function generator for troubleshooting electronic equipment. It's been very helpful in identifying problems."

Negative reviews:

  • "I wish it had a built-in arbitrary waveform generator."
  • "I would like to be able to connect an external load to the output."
  • "I wish it had a built-in speaker."

Overall, the PeakTech 4060 MV is a great value for the price. It's accurate, easy to use, and has a wide range of features. If you're looking for a function generator for educational, servicing, or manufacturing applications, then the PeakTech 4060 MV is a great option.

My thoughts:

I think the PeakTech 4060 MV is a great function generator. It's accurate, easy to use, and has a wide range of features. I especially like the USB interface, which makes it easy to control the function generator from a computer. The only downside is that it doesn't have a built-in arbitrary waveform generator, but this is a minor issue for most users. Overall, I would highly recommend the PeakTech 4060 MV to anyone looking for a good value function generator.

PeakTech 4060 MV Problems and Solutions

Here are some common issues and problems with the PeakTech 4060 MV multimeter, as well as their solutions, as provided by experts:

  • The multimeter is not turning on.
    • Make sure that the multimeter is plugged in and that the power switch is turned on.
    • If the multimeter is still not turning on, try replacing the batteries.
  • The multimeter is not displaying any readings.
    • Make sure that the probes are properly inserted into the multimeter.
    • If the probes are properly inserted and the multimeter is still not displaying any readings, try calibrating the multimeter.
  • The multimeter is displaying incorrect readings.
    • Make sure that the probes are properly connected to the circuit.
    • If the probes are properly connected and the multimeter is still displaying incorrect readings, try calibrating the multimeter.
  • The multimeter is giving a fault message.
    • Refer to the multimeter's manual for the specific fault message and its corresponding solution.

Here are some additional tips for troubleshooting problems with the PeakTech 4060 MV multimeter:

  • Check the multimeter's fuses. If the multimeter's fuses are blown, they will need to be replaced.
  • Clean the multimeter's probes. Over time, the probes can become dirty or corroded, which can lead to inaccurate readings.
  • Calibrate the multimeter regularly. Calibrating the multimeter ensures that it is giving accurate readings.

If you are still having problems with the PeakTech 4060 MV multimeter after following these troubleshooting tips, you should contact PeakTech customer support for assistance.

PeakTech 4060 MV Manual

Safety Information

  • Read and understand all safety instructions before using the PeakTech 4060 MV function generator.
  • Do not use the function generator in a hazardous environment, such as in the presence of flammable gases or liquids.
  • Keep the function generator away from children and pets.
  • Do not operate the function generator with damaged or missing components.
  • Do not use the function generator if it is not working properly.
  • Connect the function generator to a properly grounded outlet.
  • Do not overload the function generator's output.
  • Use the appropriate safety precautions when working with high-voltage signals.

Before Use

  • Before using the PeakTech 4060 MV function generator, make sure that the following items are present and in good condition:
    • Function generator
    • Power cord
    • Instruction manual
  • Verify that the function generator is properly grounded.
  • Set the output voltage to a safe level.
  • Connect the function generator to the load.

Troubleshooting

  • If the function generator is not working properly, check the following:
    • Is the function generator plugged in?
    • Is the power cord properly connected?
    • Is the function generator set to the correct output voltage?
    • Is the load connected properly?
  • If you are still having problems, please contact PeakTech customer support.

Maintenance

  • To maintain the PeakTech 4060 MV function generator, follow these simple steps:
    • Keep the function generator clean and free of dust.
    • Inspect the function generator regularly for signs of damage.
    • If the function generator is damaged, do not use it.
  • If the function generator is not used for an extended period of time, disconnect it from the power outlet.

Warranty

  • The PeakTech 4060 MV function generator is covered by a one-year warranty.
  • If the function generator malfunctions during the warranty period, it will be repaired or replaced free of charge.

Contact Information

  • PeakTech customer support can be reached by phone at +49 2236 / 3072-0 or by email at [email protected]
  • The PeakTech website can be found at https://www.peaktech.de/

Additional Information

  • The PeakTech 4060 MV function generator is a versatile tool that can be used for a variety of applications.
  • The function generator can be used to generate sine, square, triangle, and sawtooth waves.
  • The function generator can also be used to generate pulse waves and noise.
  • The function generator has a wide range of output frequencies, from 1 Hz to 10 MHz.
  • The function generator has a built-in power amplifier that can output up to 100 mW of power.

I hope this manual has been helpful. Please contact PeakTech customer support if you have any further questions.

Comments

Post a Comment

Popular posts from this blog

Bosch Gsb 10 Re Professional Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Bosch GSB 10 RE Professional Information Introduction The Bosch GSB 10 RE Professional is a compact and powerful impact drill that is ideal for a variety of drilling and driving applications. It features a 500W motor that provides plenty of power for drilling through wood, metal, and masonry. The impact mechanism delivers up to 28,000 impacts per minute, making it ideal for driving screws into tough materials. The drill is also equipped with a 10mm chuck that accepts a wide range of drill bits and screwdriver bits. Image
Read more

Makita 5704r: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Makita 5704R Information The Makita 5704R is a 1200-watt corded circular saw that is designed for general-purpose cutting. It has a 190mm (7-1/2") blade that can make cuts up to 66mm (2-5/8") deep at 90 degrees and 46mm (1-13/16") deep at 45 degrees. The saw features a powerful motor that delivers smooth and consistent cuts, and it has a dust blower that helps to keep the work area clean. The 5704R also has a number of other features that make it a versatile and easy-to-use saw, including: An adjustable rip fence for accurate cuts A laser guide for making straight cuts A soft start motor for smooth operation A dust collection port for connecting to a vacuum cleaner Image of Makita 5704R circular saw Specifications
Read more

Makita Drs780z Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Makita DRS780Z Information The Makita DRS780Z is a 185mm (7-1/4") rear handle circular saw that is powered by two 18V LXT batteries (sold separately). It features a brushless motor for increased power and runtime, as well as XPT technology for improved dust and water resistance. The DRS780Z has a large cutting capacity of 65mm (2-9/16") at 90 degrees and 53 degrees at bevel, and it comes with a variety of features to make it a versatile and user-friendly saw. Image of Makita DRS780Z circular saw Specifications
Read more